Smart Robot 3

Smart Robot 3

Safety Light Curtain Prevent Personnel Enter Robot Working Area

Installing a safety light curtain on the fence when the robot is working is an important safety measure. By doing so, you can ensure that operators and other personnel are protected from potential hazards while the robot is in operation. The safety light curtain will create a virtual barrier that, when crossed, will trigger the robot to stop or slow down, preventing any potential accidents. It's a smart and effective way to maintain a safe working environment for everyone involved.

1. Determine the installation location: First, you need to determine the installation location on the fence gate. This is usually done at a certain distance from the ground to ensure sufficient coverage.

2. Installation bracket: After determining the position, you can use the bracket safety light curtain to fix it on the fence. DAISICK can provide bracket based on the size of the light curtain and assembly guidelines provided. Ensure that the support is firm and firmly connected to the fence Tight junction.

3. Connect light curtain equipment: Connect the sensor and control equipment according to DADISICK's installation instructions. This may involve connecting power, signal, or network cables.

Featured Products

QE14-40-520-2BB|light curtain sensor|DADISICK
Beam spacing:40mm Number of optical axes:14 Protection height:520mm light curtain sensor output (OSSD):2 PNP
QT14-30-390-2BB|Industrial Light Curtain|DADISICK
Beam spacing:30mm Number of optical axes:14 Protection height: 390mm Area sensor output (OSSD):2 PNP
safety relay
safety relay for Dadisick Safety Light Curtains
QE16-40-600-2BB|security light sensor|DADISICK
Beam spacing:40mm Number of optical axes:16 Protection height:600mm Security light sensor output (OSSD):2 PNP