Safety Protection

Safety Protection

01 Hazardous Work Point
Safety light curtains protection of personnel and equipment
The hazardous work point is located directly within the machine. When personnel work in close proximity to the machine and come into contact with its internals, safety must be ensured.Safety light curtains and secure camera systems protect hands and fingers.
Safety light curtains
Safety light curtains are an important safety device that provide effective protection of personnel and equipment and help reduce workplace accidents...
Safety switches
safety relay
The safety relay module complies with EN/ISO13849-1Cat.4 safety requirements and is suitable for monitoring various signals in industrial sites with high safety requirements, including emergency stop signals, safety door switch signals, safety grating signals, and safety light curtain signals. button signal. The main purpose is to protect machinery operators and machinery and equipment exposed to different levels of hazards.
02 Entrance Monitoring
Safety light curtains protection of equipment
Photoelectric protective devices are used to monitor the entrances to hazardous areas. Worker interaction with the machines is regular but not frequent. In the context of safety at the entrance of an automatic material conveyor system, it is crucial to reliably differentiate between personnel and materials. Materials should pass through smoothly without causing equipment stoppage. However, if someone enters the monitoring zone, any potentially dangerous actions must be stopped.
Safety light curtains
Safety light curtains are an important safety device that provide effective protection of personnel and equipment and help reduce workplace accidents...
Safety switches
safety relay
The safety relay module complies with EN/ISO13849-1Cat.4 safety requirements and is suitable for monitoring various signals in industrial sites with high safety requirements, including emergency stop signals, safety door switch signals, safety grating signals, and safety light curtain signals. button signal. The main purpose is to protect machinery operators and machinery and equipment exposed to different levels of hazards.
laser scanning radar
Through laser scanning to accurately restore the surrounding environment, if an object enters the preset warning area, the lidar will provide an audible and visual warning signal to the operator. Lidar has been widely used in many fields such as driverless near-field obstacle avoidance, service robot autonomous positioning and navigation, AGV obstacle avoidance and navigation, factory area operation safety protection, intelligent security safety monitoring, and smart transportation vehicle detection...
Safety Mats
The safety mat is a pressure-sensitive safety protection device. When a set minimum weight is exerted on the safety mat, the switch will turn off and the controller will then send a stop signal to the protected machine to stop its movement. Reliably protect operators from various potential hazards.
03 Buildings and Facilities
LiDAR combined with AGV logistics forklift
Electronic protective devices play a significant role in ensuring the security of public buildings, real estate, residential properties, and other real estate. These devices complement existing protective measures, such as security personnel or structural changes in the building, very effectively. Sensors are effective in preventing vandalism, theft, intrusion, and escape. Safety measures arranged from the outside in can trigger alarms early, giving security personnel more time for intervention.
Safety light curtains
Safety light curtains are an important safety device that provide effective protection of personnel and equipment and help reduce workplace accidents...
laser scanning radar
Through laser scanning to accurately restore the surrounding environment, if an object enters the preset warning area, the lidar will provide an audible and visual warning signal to the operator. Lidar has been widely used in many fields such as driverless near-field obstacle avoidance, service robot autonomous positioning and navigation, AGV obstacle avoidance and navigation, factory area operation safety protection, intelligent security safety monitoring, and smart transportation vehicle detection.
Measuring light curtains
Measuring light curtains are suitable for high-precision inspection and measurement, including dimensional measurement, spray positioning, parts counting, contour detection, precision correction, hole detection, shape detection, edge and center positioning, online product size detection, etc., with a scanning Method, cooperate with the controller and its software to realize the function of monitoring and measuring the shape and size of objects.
04 Hazardous Area
Security Light Curtain Multi Sided Access Protection Robot
A hazardous area refers to a region within or around machinery where personnel are at risk of injury or health damage. Threats caused by risks can be persistent or unexpected.
Safety Light Curtains
Safety light curtains are an important safety device that provide effective protection of personnel and equipment and help reduce workplace accidents...
Laser Scanning Radar
Through laser scanning to accurately restore the surrounding environment, if an object enters the preset warning area, the lidar will provide an audible and visual warning signal to the operator. Lidar has been widely used in many fields such as driverless near-field obstacle avoidance, service robot autonomous positioning and navigation, AGV obstacle avoidance and navigation, factory area operation safety protection, intelligent security safety monitoring, and smart transportation vehicle detection.
Safety Switches
Safety door lock switches are used in a variety of applications where access needs to be restricted or to prevent accidental activation. They are a mechanism that increases security by preventing accidental or unauthorized use of a specific piece of machinery, equipment or system...
Safety Relay 
The safety relay module complies with EN/ISO13849-1Cat.4 safety requirements and is suitable for monitoring various signals in industrial sites with high safety requirements, including emergency stop signals, safety door switch signals, safety grating signals, and safety light curtain signals. button signal. The main purpose is to protect machinery operators and machinery and equipment exposed to different levels of hazards.
05 Machinery and Equipment
Safety mat and Lidar Protection in hazardous work areas
The safety protection of machinery and equipment is a key measure to ensure the safety of operators and the surrounding environment from potential hazards. Assess and implement appropriate safety protection measures based on the specific circumstances to minimize the risk of accidents and injuries.
Safety switches
Safety door lock switches are used in a variety of applications where access needs to be restricted or to prevent accidental activation. They are a mechanism that increases security by preventing accidental or unauthorized use of a specific piece of machinery, equipment or system.
laser scanning radar
Through laser scanning to accurately restore the surrounding environment, if an object enters the preset warning area, the lidar will provide an audible and visual warning signal to the operator. Lidar has been widely used in many fields such as driverless near-field obstacle avoidance, service robot autonomous positioning and navigation, AGV obstacle avoidance and navigation, factory area operation safety protection, intelligent security safety monitoring, and smart transportation vehicle detection.
Safety Mats
The safety mat is a pressure-sensitive safety protection device. When a set minimum weight is exerted on the safety mat, the switch will turn off and the controller will then send a stop signal to the protected machine to stop its movement. Reliably protect operators from various potential hazards.
06 Monitoring Gates and Hatches
Security sensor product portfolio protects unmanned work areas
For safety functionality, doors of separated protective facilities should be locked. Safety locking devices are used to temporarily block entrances. 
Meanwhile, the safety system monitors the doors and skylights.
Safety switches
Safety door lock switches are used in a variety of applications where access needs to be restricted or to prevent accidental activation. They are a mechanism that increases security by preventing accidental or unauthorized use of a specific piece of machinery, equipment or system.
laser scanning radar
Through laser scanning to accurately restore the surrounding environment, if an object enters the preset warning area, the lidar will provide an audible and visual warning signal to the operator. Lidar has been widely used in many fields such as driverless near-field obstacle avoidance, service robot autonomous positioning and navigation, AGV obstacle avoidance and navigation, factory area operation safety protection, intelligent security safety monitoring, and smart transportation vehicle detection.
safety relay
The safety relay module complies with EN/ISO13849-1Cat.4 safety requirements and is suitable for monitoring various signals in industrial sites with high safety requirements, including emergency stop signals, safety door switch signals, safety grating signals, and safety light curtain signals. button signal. The main purpose is to protect machinery operators and machinery and equipment exposed to different levels of hazards.
Laser displacement sensors
A laser displacement sensor is a sensor that uses laser technology to measure the position and distance of objects. Based on the working principle of time-of-flight and trigonometric ranging, by emitting a laser beam to a target object and back in time. By measuring the time delay (or phase difference) and a known value of the speed of light, the sensor can calculate the distance between the object and the sensor. It can provide non-contact measurement with high accuracy and fast response, and can be integrated with other sensors or systems to achieve more complex measurement and control tasks.
Ultrasonic sensors
Safety Mats
The safety mat is a pressure-sensitive safety protection device. When a set minimum weight is exerted on the safety mat, the switch will turn off and the controller will then send a stop signal to the protected machine to stop its movement. Reliably protect operators from various potential hazards.
07 Position
Measure the light curtain for spray testing
The machine's position, machine end positions, or machine component positioning are reliably monitored.
Safety switches
Safety door lock switches are used in a variety of applications where access needs to be restricted or to prevent accidental activation. They are a mechanism that increases security by preventing accidental or unauthorized use of a specific piece of machinery, equipment or system.
laser scanning radar
Through laser scanning to accurately restore the surrounding environment, if an object enters the preset warning area, the lidar will provide an audible and visual warning signal to the operator. Lidar has been widely used in many fields such as driverless near-field obstacle avoidance, service robot autonomous positioning and navigation, AGV obstacle avoidance and navigation, factory area operation safety protection, intelligent security safety monitoring, and smart transportation vehicle detection.
safety relay
The safety relay module complies with EN/ISO13849-1Cat.4 safety requirements and is suitable for monitoring various signals in industrial sites with high safety requirements, including emergency stop signals, safety door switch signals, safety grating signals, and safety light curtain signals. button signal. The main purpose is to protect machinery operators and machinery and equipment exposed to different levels of hazards.
Ultrasonic sensors
08 Action
Safety light curtains provide protection for people and machinery equipment
The shutdown status, speed, and motion direction of machines and equipment are reliably monitored.
Safety switches
Safety door lock switches are used in a variety of applications where access needs to be restricted or to prevent accidental activation. They are a mechanism that increases security by preventing accidental or unauthorized use of a specific piece of machinery, equipment or system.
safety relay
The safety relay module complies with EN/ISO13849-1Cat.4 safety requirements and is suitable for monitoring various signals in industrial sites with high safety requirements, including emergency stop signals, safety door switch signals, safety grating signals, and safety light curtain signals. button signal. The main purpose is to protect machinery operators and machinery and equipment exposed to different levels of hazards.