DK-CSR30-2000-IU-V15 | Ultrasonic Sensor | DADISICK
- Model
- DK-CSR30 series | DK-CSR30-2000-IU-V15
Item specifics
- Size:
- Cylindrical M30 mm
- Detection range:
- 100-2000 mm
- Material:
- Plastic accessories, filled with epoxy resin
- Connection type:
- 5-pin M12 connector
- Output method:
- Analog voltage + analog current
- Security level:
- IP67
- Ambient temperature:
- -25°C~+70°C (248~343K)
Review
Description
|
Ultrasonic Water Level Sensor DK-CSR30 series switch output E2/E3/E4/E5, E6/E7/E8/E9
|
||
|
Model
|
DK-CSR30-2000-E2-V15
|
DK-CSR30-3000-E2-V15
|
|
DK-CSR30-2000-E3-V15
|
DK-CSR30-3000-E3-V15
|
|
|
DK-CSR30-2000-E4-V15
|
DK-CSR30-3000-E4-V15
|
|
DK-CSR30-2000-E5-V15 | DK-CSR30-3000-E5-V15 | |
DK-CSR30-2000-E6-V15 | DK-CSR30-3000-E6-V15 | |
DK-CSR30-2000-E7-V15 | DK-CSR30-3000-E7-V15 | |
DK-CSR30-2000-E8-V15 | DK-CSR30-3000-E8-V15 | |
DK-CSR30-2000-E9-V15 | DK-CSR30-3000-E9-V15 | |
Detection range | 100-2000 mm | 150-3000 mm |
Blind zone | 0-100 mm | 0-150 mm |
Resolution | 0.17 mm | 0.17 mm |
Repeatability | ±0.15% of full-scale value | |
Absolute accuracy | ±1% (built-in temperature drift compensation) | |
Response time | 82 ms | 102 ms |
Switching hysteresis | ±2 mm | ±3 mm |
Switching frequency | 10 Hz | 9 Hz |
Input type | With synchronization and learning function | |
Output type: E2/E4 | 1 NPN switch output, NO/NC | |
Output type: E3/E5 | 1 PNP switch output, NO/NC | |
Output type: E6/E8 | 2 PNP switch output, NO/NC | |
Output type: E7/E9 | 2 NPN switch output, NO/NC | |
Weight | 62 g | 62 g |
|
DK-CSR30 series analog output/digital output I/U/IU/IE4/UE4, RS485
|
||
|
Model
|
DK-CSR30-2000-I-V15
|
DK-CSR30-3000-I-V15
|
|
DK-CSR30-2000-U-V15
|
DK-CSR30-3000-U-V15
|
|
|
DK-CSR30-2000-IU-V15
|
DK-CSR30-3000-IU-V15
|
|
DK-CSR30-2000-IE4-V15 | DK-CSR30-3000-IE4-V15 | |
DK-CSR30-2000-IE5-V15 | DK-CSR30-3000-IE5-V15 | |
DK-CSR30-2000-UE4-V15 | DK-CSR30-3000-UE4-V15 | |
DK-CSR30-2000-UE5-V15 | DK-CSR30-3000-UE5-V15 | |
DK-CSR30-2000-R4-V15 | DK-CSR30-3000-R4-V15 | |
Detection range | 100-2000 mm | 150-3000 mm |
Blind zone | 0-100 mm | 0-150 mm |
Resolution | 0.17 mm | 0.17 mm |
Repeatability | ±0.15% of full-scale value | |
Absolute accuracy | ±1% (built-in temperature drift compensation) | |
Response time | 82 ms | 102 ms |
Switching hysteresis | ±2 mm | ±3 mm |
Switching frequency | 10 Hz | 9 Hz |
Input type | With synchronization and learning function | |
Output type: I | 1 analog current output 4-20 mA, rise/fall | |
Output type: U | 1 analog voltage output 0-10 V, rise/fall | |
Output type: IU | 1 analog current output 4-20 mA + 1 analog voltage output 0-10 V, rise/fall | |
Output type: IE4 | 1 analog current output 4-20 mA + 1 switching output NPN, rise/fall, NO/NC | |
Output type: IE5 | 1 analog current output 4-20 mA + 1 switching output PNP, rise/fall, NO/NC | |
Output type: UE4 | 1 analog voltage output 0-10 V + 1 switching output NPN, rise/fall, NO/NC | |
Output type: UE5 | 1 analog voltage output 0-10 V + 1 switching output PNP, rise/fall, NO/NC | |
Output type: R4 | 1 digital output RS485 modbus-rtu | |
Weight | 62 g | 62 g |
|
Electrical data
|
|||
|
Power-up Timer
|
< 500 ms
|
||
|
Operating voltage
|
10-30 V DC, reverse polarity protection
|
||
|
LED red light
|
No target is always bright , and no target flashes when studying
|
||
LED green Iight | Detected that the target is always bright , and the target flashes when studying | ||
Overpower protection | 200 mA , red light and green light flashing at the same time | ||
Load impedance | I / 0-300 Ohm , U / > 1k Ohm | ||
No-load current | ≤ 30 mA | ||
Structure | Cylindrical | ||
Material | Plastic accessories, filled with epoxy resin | ||
Connection type | 5-pin M12 connector | ||
Protection Class | IP 67 | ||
|
Environmental parameters
|
|||
|
Ambient temperature
|
-25°C~+70°C (248~343K)
|
||
Storage temperature | -40°C~+85°C (233~358K) | ||
