GFK/W-02 | Contact Digital Displacement Sensor | DADISICK
- Model
- GFK & GFW Series | GFK/W-02
Item specifics
- Digit:
- Thousandths/Ten thousandths
- Resolution:
- 0.1μm
- Repeat accuracy:
- < 1μm
- Supply voltage:
- DC12V
- Operating temperature:
- -10~60°C
- Product size:
- 90x23x21 mm
- Wire length:
- 2m+1m(output line 1m)
- Installation method:
- Standard DIN rail
Review
Description
|
Contact Digital Displacement Sensor Basic information
|
||
Product type | GFJ-HA | GFJ-KA |
Digit | Thousandths | Ten thousandths |
Can be matched with sensor range | Rebound type 2mm/ 5mm/10mm/air push type 10mm, reed type, etc. | |
Resolution | 0.1μm | |
Repeat accuracy | < 1μm | |
Supply voltage | DC12V | |
Operating temperature | -10~60°C | |
Storage temperature | -20~70°C | |
Product size | 90x23x21 mm | |
Wire length | 2m+1m(output line 1m) | |
Installation method | Standard DIN rail | |
Remarks | If you need other range sensors, please communicate with sales in advance | |
|
Main Technical Parameters
|
|||
Range | 2mm(±1mm) | Working temperature | -10~80°C |
Coil type | Full bridge | Protection level |
IP65 |
Drive mode | Rebound type | Case hardness | HR15N80 |
Excitation frequency | 13kHz | Fatigue life | 15 million times |
Resolution | Minimum 0.1μm | Probe | Standard probe (optional) |
Repeat accuracy | 0.3μm | Guide device | Ball bearing |
Linearity | ±0.1% F.S | Case material | Stainless steel |
Temperature coefficient | 0.01% F.S./℃ | Protective rubber sleeve | Fluoroelastomer |
Measurement force | 0.9N (middle position) | Line length | 2m (customizable) |
DIMENSION
GFK & GFW Series Contact Digital Displacement Sensor Display Box Dimension
GFK/W-02 2mm rebound sensor Dimension
WIRING DIAGRAM
GFK & GFW Series Contact Digital Displacement Sensor Wiring Instructions
DOCUMENTS & DOWNLOADS
CATALOGUE
