Non-contact Safety Door Switch OX-R1 Series | RFID Technology
- Model
- OX-R1 Series | OX-R1-FN-S-P1, OX-R1-FP-S-P1, OX-R1-EN-S-P1, OX-R1-EP-S-P1, OX-R1-FN-D-P1, OX-R1-FP-D-P1, OX-R1-EN-D-P1, OX-R1-EP-D-P1
Item specifics
- Cascade type:
- Support cascade or Do not support cascade
- Output type:
- Dual NPN output or Dual PNP output
- Coding type:
- Universal code or Unique code
- Horizontal distance:
- Conduction, min: 10 mm
- Vertial distance:
- Conduction, min: 8 mm
Review
Description
Model Speciǁcations
|
Safety standards
|
ISO13849-1, IEC/EN60947-5-1, IEC/EN60947-5-3
|
|
|
Safety classiǁcation
|
Class 4 switch with IS0 13849-1/suitable for PLe/PLd
|
|
|
Certification
|
CE
|
|
Horizontal distance | Conduction, min: 10 mm | |
|
Vertical distance
|
Conduction, min: 8 mm
|
|
Operating voltage | 24 V DC±15% | |
Operating current | 30 mA | |
Output current | 150 mA | |
Response time | 60 ms | |
Protection level | IP65, IP67 (customized)\IP68 (customized) | |
Operating frequency | 1 Hz | |
Operating temperature | -10 ~ +55°C | |
Relative humidity | 5 ~ 95% | |
Material | Anti-flame retardant thermoplastic | |
Model Description
|
Model
|
Speciǁcations
|
|
|
OX-R1-FN-S-P1
|
4-core direct wiring dual NPN output 2M line
|
|
|
OX-R1-FP-S-P1
|
4-core direct wiring dual PNP output 2M line
|
|
OX-R1-EN-S-P1 | 6-core direct wiring dual NPN output with cascade 2M line | |
OX-R1-EP-S-P1 | 6-core direct wiring dual PNP output with cascade 2M line | |
OX-R1-FN-D-P1 | 4-core direct wiring dual NPN output 2M line, Actuator with unique code | |
OX-R1-FP-D-P1 | 4-core direct wiring dual PNP output 2M line, Actuator with unique code | |
OX-R1-EN-D-P1 | 6-core direct wiring dual NPN output with cascade 2M line, Actuator with unique code | |
OX-R1-EP-D-P1 | 6-core direct wiring dual PNP output with cascade 2M line, Actuator with unique code | |
Indicator Status
|
Led Display
|
Signal Status |
Status Description
|
|||
Input |
Output
|
||||
|
Red light always on
|
Yes/No |
Disconnect
|
No actuator or not fully aligned (universal encoding)
|
||
|
Red light on for 1 second and then flashes 2 times (alternatingly)
|
Yes/No |
Disconnect
|
No actuator or not fully aligned (unique encoding)
|
||
Red light flashes at 4 Hz | Yes | Disconnect | Output overload | ||
Green light flashes at 1 Hz | No | Disconnect | No input signal (dual output not applicable) | ||
Green light always on | Yes | Connect | Sensing normal | ||
Red and green lights flash alternately | Yes | Disconnect | Tag not registered | ||
