Metal Face Inductive Proximity Sensor | LJ18 Pre-wired Non-Shielded Cylindrical Φ18mm Standard 2 Meter Cable | DADISICK
Metal Face Inductive Proximity Sensor | LJ18 Pre-wired Non-Shielded Cylindrical Φ18mm Standard 2 Meter Cable | DADISICK
Model
Metal Face Inductive Proximity Sensor | LJ18 Pre-wired Non-Shielded Cylindrical Φ18mm | LJ18-08NO-ZBA-3A-S, LJ18-08NC-ZBA-3A-S, LJ18-08PO-ZBA-3A-S, LJ18-08PC-ZBA-3A-S, LJ18-08HO-ZBD-2A-S, LJ18-08HC-ZBD-2A-S,LJ18-10NO-ZBA-3A-S, LJ18-10NC-ZBA-3A-S, LJ18-10PO-ZBA-3A-S, LJ18-10PC-ZBA-3A-S,

Item specifics

Size:
Cylindrical Φ18mm
Detection range:
8mm-10mm
Case material:
Stainless steel
Connection type:
2M cable
Output method:
NPN NC/NO, PNP NC/NO, NC, NO
Degree of protection:
IP67
Operating temperature:
-25°C~+70°C (248~343K)

Review

Description

Metal Face Inductive Proximity Sensor Ф18mm Standar Non-Shielded Pre-wired Series 2M Cable Datasheet
Model
Output
Sensing distance
Connection
Maximum load current
Mounting
Operating voltage
Case material
LJ18-08NO-ZBA-3A-S
NPN NO
8mm
2M Cable
200mA
Non-Shielded
10-30VDC
Stainless steel
LJ18-08NC-ZBA-3A-S
NPN NC
LJ18-08PO-ZBA-3A-S
PNP NO
LJ18-08PC-ZBA-3A-S
PNP NC
LJ18-08HO-ZBD-2A-S
DC 2-wire NO
10-60V
LJ18-08HC-ZBD-2A-S
DC 2-wire NC
LJ18-10NO-ZBA-3A-S
NPN NO
10mm
10-30VDC

LJ18-10NC-ZBA-3A-S
NPN NC
LJ18-10PO-ZBA-3A-S
PNP NO
LJ18-10PC-ZBA-3A-S
PNP NC
LJ18-08AO-ZBG-3S-S
NO
8mm
400mA
20-250VAC
LJ18-08AC-ZBG-3S-S
NC
Electrical data
LED Display
Yes
Allowable ripple voltage
<10%
No-load current
<10mA
Leakage Current
<0.01mA
Voltage drop
<1.5v
Switching frequency
1KHz 
Response time
0.1ms
Switching Hysteresis
<15%(Sr)
Repeat accuracy
<1.0%(Sr)
Degree of protection
IP67
Operating temperature
-25℃ to +70℃
Temperature Drift
<10%(Sr)
Load short-circuit protection / reverse polarity protection
Yes
Overload protection
220mA
Sensing surface material
Stainless steel
Data sheet
Metal Face Series Inductive Proximity Switch DataSheet

recommend