KT10-14-130-2BB|Machine Light Curtains|DADISICK
KT10-14-130-2BB|Machine Light Curtains|DADISICK
KT10-14-130-2BB|Machine Light Curtains|DADISICK
KT10-14-130-2BB|Machine Light Curtains|DADISICK
KT10-14-130-2BB|Machine Light Curtains|DADISICK
KT10-14-130-2BB|Machine Light Curtains|DADISICK
Model
KT10-14-130-2BB

Item specifics

Factory packaging
1 Receiver and 1Emitter accessories, cable
Detection distance:
0.3-6M
Beam spacing:
10mm
Number of optical axes:
14
Protection height:
130mm
2 Safety outputs (OSSD)
2 PNP
Interface plug
Equipped with M8 connector
Certification:
TUV,UL,CE,RoSH,GB

Review

Description

DOCUMENTS & DOWNLOADS                                                                                                                                                                                           
Product model
Products series
KT series machine light curtains
Machine light curtains kit composition
One receiver, one transmitter, two data lines, one right-angle rack, and one t-shaped screw
Safety  Certificate
TÜV CE, China GB certificate, ISO Certificate  UL- FCC,TYPE 2
Standard packaging
Standard industrial environment
Features
Beam gap
10mm
Detect accuracy
18mm
Quantity of beams
14
Operation range
130mm
Product size
29mm*29mm*L,L is the length of emitter and receiver.
Detection distance
30-6000mm
Response time
≤15ms

Mechanical data
Housing material
Housing material
Metal casing
Aluminium
Lens front panel
Acrylic
Upper and lower cap materials
ABS reinforced nylon PA66+30% GF
Synchronization
Current consumption
≤200mA
Output mode
2  PNP, with current of 500mA and voltage below 1.5V, polarity, short circuit and over-cutting protection
Output status
ON (receiving indicator green light)
Indicator lamp
Transmitter: power indicator light (red); receiver: output indicator light on (green), blackout (red)
Wave length
850nm
Type of emitter
Infrared light (NIR), invisible
Function available
Automatic reset
Synchronization
Line synchronization
Performance data
Circuit protection
Short circuit protection
Voltage protection
Overvoltage protection
Maximum current consumption
24VDC,-20...20%
Fuse
150mA
Environmental data
IP degree of protection
IP68
Resistance to ambient light disturbance
Incandescent light: illumination of light-receiving surface 3000Lx; Sunlight: illumination of light-receiving surface 10000Lx
Ambient air temperature
Operation temperature: - 10~+40 ℃ (but not frozen), storage temperature: - 25 -+55 ℃
Ambient relative humidity
Operating: 35~85% RH, storage: 35~95% RH
Output
Number of safe output circuits (OSSD)
2-circuit
Maximum switch voltage
18V
Minimum switch voltage
2.5V
Standard switching voltage
22.5V
Output circuit type
DC
Maximum current load
380mA
Load inductance
2000
Load capacity
0.3
Maximum residual current
0.2mA
Standard residual current
0.002MA
Voltage drop
1.5V
Safety switch output 1
Connection pin 3, WHITE OSSD1   
Safety switch output 2
Connection pin 4, BLACK OSSD2
Switching type
Transistor  2 PNP
Electrical interface
Composition of interfaces
2 (receiver and transmitter)
Connector type
M8 connector, 
Interface material
Copper nickel plating
Plug material
GY384 gray 30P
Available typical conductor section
0.25mm²
Maximum lenght of cable
100m
Maximum load of cable
4.9A
Cable wrapping material
PVC
DIMENSION                                                                                                                                                                                           
Safety light curtain dimensions
ACCESSORIES                                                                                                                                                                                           
Safety light curtain KT series accessories for KT-01 swivel fastening brackets
Mainly used in the safety light curtain, not only solid installation and good shock resistance can be rotated Angle.
Safety light curtain KT series accessories for QCA-02  T-shaped card slot
It can be directly put into the aluminum groove, in the process of installation, it can automatically locate and lock.
Safety light curtain KT series accessories for QCA-03-Convex groove
Convex groove function:high production efficiency, good heat dissipation, easy to use and maintenance.
Safety light curtain KT series accessories for QCA-01 Column stainless steel bracket
The safety light curtain are fixed on support,and then debug according to the specific situation.
safety relay
safety relay for Dadisick Safety Light Curtains
Controller QET
Controller QET for Dadisick Safety Light Curtains
DOCUMENTS & DOWNLOADS                                                                                                                                                                                          
CATALOGUE & USER GUIDE

Machine Light Curtains KT Series User Manual

Machine Light Curtains KT Series-data sheet

3D
KT10-14-130-2BB.3D-STEP
DIMENSIONED DRAWINGS                                                                                                                                                                                         
Machine Light Curtains Cable Description
Machine Light Curtains Cable Description
signal output selection (actual output of transistor working normally)
Signal Output Selection (Actual Output Of Transistor Working Normally)
NPN output wiring diagram
NPN Output Wiring Diagram
PNP Output Wiring Diagram
PNP Output Wiring Diagram