Metal Face Inductive Proximity Sensor | LJ18 Connector Non-Shielded Cylindrical Φ18mm Standard M12 Connector | DADISICK
- Model
- Metal Face Inductive Proximity Sensor | LJ18 Connector Non-Shielded Cylindrical Φ18mm | LJ18-08NO-YBA-TA-S, LJ18-08NC-YBA-TA-S, LJ18-08PO-YBA-TA-S, LJ18-08PC-YBA-TA-S, LJ18-08HO-YBD-TA-S, LJ18-08HC-YBD-TA-S,LJ18-10NO-YBA-TA-S, LJ18-10NC-YBA-TA-S, LJ18-10PO-YBA-TA-S, LJ18-10PC-YBA-TA-S,LJ18-08AO-YBG-TS-S, LJ18-08AC-YBG-TS-S
Item specifics
- Size:
- Cylindrical Φ18mm
- Detection range:
- 8mm-10mm
- Case material:
- Stainless steel
- Connection type:
- M12 Connector
- Output method:
- NPN NC/NO, PNP NC/ NO, NO, NC
- Degree of protection:
- IP67
- Operating temperature:
- -25°C~+70°C (248~343K)
Review
Description
|
Metal Face Inductive Proximity Sensor Ф18mm Connector Standard Non-Shielded Series M12 Connector Datasheet
|
||||||||
|
Model
|
Output | Sensing distance | Connection | Maximum load current | Mounting | Operating voltage | Case material |
|
LJ18-08NO-YBA-TA-S | NPN NO | 5mm | M12 Connector | 200mA | Non-Shielded | 10-30VDC | Stainless steel | |
LJ18-08NC-YBA-TA-S | NPN NC | |||||||
LJ18-08PO-YBA-TA-S | PNP NO | |||||||
LJ18-08PC-YBA-TA-S | PNP NC | |||||||
LJ18-08HO-YBD-TA-S | DC 2-wire NO | 10-60VDC | ||||||
LJ18-08HC-YBD-TA-S | DC 2-wire NC | |||||||
LJ18-10NO-YBA-TA-S | NPN NO | 8mm | 10-30VDC | |||||
LJ18-10NC-YBA-TA-S | NPN NC | |||||||
LJ18-10PO-YBA-TA-S | PNP NO | |||||||
LJ18-10PC-YBA-TA-S | PNP NC | |||||||
LJ18-08AO-YBG-TS-S | NO | 5mm | 400mA | 10-60VDC | ||||
LJ18-08AC-YBG-TS-S | NC | |||||||
|
Electrical data
|
|||
|
LED Display
|
Yes
|
||
|
Allowable ripple voltage
|
<10%
|
||
|
No-load current
|
<10mA
|
||
Leakage Current | <0.01mA | ||
Voltage drop | <1.5v | ||
Switching frequency | 1KHz / 500KHz | ||
Response time | 0.1ms | ||
Switching Hysteresis | <15%（Sr） | ||
Repeat accuracy | <1.0%（Sr） | ||
Degree of protection | IP67 | ||
Operating temperature | -25℃ to +70℃ | ||
Temperature Drift | <10%（Sr） | ||
Load short-circuit protection / reverse polarity protection | Yes | ||
Overload protection | 220mA | ||
Sensing surface material | Stainless steel | ||
Data sheet
