Metal Face Inductive Proximity Sensor | LJ30 Pre-wired Non-Shielded Cylindrical Φ30mm Short Type 2 Meter Cable | DADISICK
- Model
- Metal Face Inductive Proximity Sensor | LJ30 Pre-wired Non-Shielded Cylindrical Φ30mm | LJ30-13NO-ZBA-3M-S, LJ30-13NC-ZBA-3M-S, LJ30-13PO-ZBA-3M-S, LJ30-13PC-ZBA-3M-S, LJ30-13HO-ZBD-2M-S, LJ30-13HC-ZBD-2M-S
Item specifics
- Size:
- Cylindrical Φ30mm
- Detection range:
- 13mm
- Case material:
- Stainless steel
- Connection type:
- 2M cable
- Output method:
- NPN NC/NO, PNP NC/NO, NC, NO
- Degree of protection:
- IP67
- Operating temperature:
- -25°C~+70°C (248~343K)
Review
Description
|
Metal Face Inductive Proximity Sensor Ф30mm Short Type Non-Shielded Pre-wired Series 2M Cable Datasheet
|
||||||||
|
Model
|
Output | Sensing distance | Connection | Maximum load current | Mounting | Operating voltage | Case material |
|
LJ30-13NO-ZBA-3M-S | NPN NO | 13mm | 2M Cable | 200mA | Non-Shielded | 10-30VDC | Stainless steel | |
LJ30-13NC-ZBA-3M-S | NPN NC | |||||||
LJ30-13PO-ZBA-3M-S | PNP NO | |||||||
LJ30-13PC-ZBA-3M-S | PNP NC | |||||||
LJ30-13HO-ZBD-2M-S | DC 2-wire NO | 10-60VDC | ||||||
LJ30-13HC-ZBD-2M-S | DC 2-wire NC | |||||||
|
Electrical data
|
|||
|
LED Display
|
Yes
|
||
|
Allowable ripple voltage
|
<10%
|
||
|
No-load current
|
<10mA
|
||
Leakage Current | <0.01mA | ||
Voltage drop | <1.5v | ||
Switching frequency | 1KHz | ||
Response time | 0.1ms | ||
Switching Hysteresis | <15%（Sr） | ||
Repeat accuracy | <1.0%（Sr） | ||
Degree of protection | IP67 | ||
Operating temperature | -25℃ to +70℃ | ||
Temperature Drift | <10%（Sr） | ||
Load short-circuit protection / reverse polarity protection | Yes | ||
Overload protection | 220mA | ||
Sensing surface material | Stainless steel | ||
Data sheet
