Ring Inductive Proximity Sensor | Time-delay Static Mode | LI16, LI17, LI21, LI22, LI25 Pre-wired and Connector Inner Hole DiameterInner 16, 17, 21, 22, 25mm | DADISICK
- Model
- Ring Inductive Proximity Sensor | LI16, LI17, LI21, LI22, LI25 Pre-wired and Connector | LI16-20NS-ZBA-4A-PT, LI16-20PS-ZBA-4A-PT, LI16-20NS-YBA-TA-PT, LI16-20PS-YBA-TA-PT, LI17-20NS-ZBA-4A-PT, LI17-20PS-ZBA-4A-PT, LI17-20NS-YBA-TA-PT, LI17-20PS-YBA-TA-PT, LI21-20NS-ZBA-4A-PT, LI21-20PS-ZBA-4A-PT, LI21-20NS-YBA-TA-PT, LI21-20PS-YBA-TA-PT, LI22-20NS-ZBA-4A-PT, LI22-20PS-ZBA-4A-PT, LI22-20NS-YBA-TA-PT, LI22-20PS-YBA-TA-PT, LI25-20NS-ZBA-4A-PT, LI25-20PS-ZBA-4A-PT, LI25-20NS-YBA-TA-PT, LI25-20PS-YBA-TA-PT
Item specifics
- Inner Hole DiameterInner:
- 16, 17, 21, 22, 25mm
- Detection range:
- 20mm
- Case material:
- PBT
- Connection type:
- 2M Cable, M12 Connector
- Output method:
- NPN NO/NC，PNP NO/NC
- Degree of protection:
- IP67
- Operating temperature:
- -25°C~+70°C (248~343K)
Review
Description
Ring Inductive Proximity Sensor Time-delay Dynamic Mode Pre-wired and Connector Series Datasheet |
|||||||||||
Model |
Output | Connection | Inner hole diameter | Sensing distance | Maximum load current | Mounting | Operating voltage | Case material |
|||
LI16 Pre-wired | LI16-20NS-ZBA-4A-PT | NPN NO+NC | 2 M cable | 16mm | 20mm | 200mA | Non-shielded | 10-30VDC | PBT | ||
LI16-20PS-ZBA-4A-PT
| PNP NO+NC | ||||||||||
LI16 Connector | LI16-20NS-YBA-TA-PT | NPN NO+NC | M12 connector | ||||||||
LI16-20PS-YBA-TA-PT
| PNP NO+NC | ||||||||||
LI17 Pre-wired | LI17-20NS-ZBA-4A-PT | NPN NO+NC | 2 M cable | 17mm | 20mm | 200mA | Non-shielded | 10-30VDC | PBT | ||
LI17-20PS-ZBA-4A-PT
| PNP NO+NC | ||||||||||
LI17 Connector | LI17-20NS-YBA-TA-PT
| NPN NO+NC | M12 connector | ||||||||
LI17-20PS-YBA-TA-PT
| PNP NO+NC | ||||||||||
LI21 Pre-wired | LI21-20NS-ZBA-4A-PT | NPN NO+NC | 2 M cable | 21mm | 20mm | 200mA | Non-shielded | 10-30VDC | PBT | ||
LI21-20PS-ZBA-4A-PT
| PNP NO+NC | ||||||||||
LI21 Connector | LI21-20NS-YBA-TA-PT
| NPN NO+NC | M12 connector | ||||||||
LI21-20PS-YBA-TA-PT
| PNP NO+NC | ||||||||||
LI22 Pre-wired | LI22-20NS-ZBA-4A-PT | NPN NO+NC | 2 M cable | 22mm | 20mm | 200mA | Non-shielded | 10-30VDC | PBT | ||
LI22-20PS-ZBA-4A-PT
| PNP NO+NC | ||||||||||
LI22 Connector | LI22-20NS-YBA-TA-PT
| NPN NO+NC | M12 connector | ||||||||
LI22-20PS-YBA-TA-PT
| PNP NO+NC | ||||||||||
LI25 Pre-wired | LI25-20NS-ZBA-4A-PT | NPN NO+NC | 2 M cable | 25mm | 20mm | 200mA | Non-shielded | 10-30VDC | PBT | ||
LI25-20PS-ZBA-4A-PT
| PNP NO+NC | ||||||||||
LI25 Connector | LI25-20NS-YBA-TA-PT
| NPN NO+NC | M12 connector | ||||||||
LI25-20PS-YBA-TA-PT
| PNP NO+NC | ||||||||||
|
Electrical data
|
|||||
|
LED display
|
Yes
|
||||
|
Allowable ripple voltage
|
<10%
|
||||
Minimum interval time of the object to be detected | 0.1ms | ||||
|
No-load current
|
<10mA
|
||||
Leakage current | <0.01mA | ||||
Adjustable pulse width time
| 0.1-200ms
| ||||
Response time | 0.1ms | ||||
Voltage drop | <1.5v at 200mA | ||||
Switching frequency | 2KHZ | ||||
Adjustable sensitivity | Yes | ||||
Switching hysteresis | 15% | ||||
Repeat accuracy | <2%（Sr） | ||||
Degree of protection | IP67 | ||||
Operating temperature | -25℃ to +70℃ | ||||
Temperature drift | ±10%（Sr） | ||||
Minimum detection object | D=3mm;L=6mm (Inner hole diameter 16mm), D=4mm;L=7mm (Inner hole diameter 17mm), D=6mm;L=12mm (Inner hole diameter 21mm, 22mm, 25mm) | ||||
Fastest passing speed
| 40m/s | ||||
Load short-circuit protection / reverse polarity protection | Yes | ||||
Overload protection | 220mA | ||||
Data sheet
