Capacitive Proximity Sensor | Cylindrical Φ34 Brass Nickel Plated 2 Meter Cable CR34 Pre-wired Shielded and Non-Shielded | DADISICK
Capacitive Proximity Sensor | Cylindrical Φ34 Brass Nickel Plated 2 Meter Cable CR34 Pre-wired Shielded and Non-Shielded  | DADISICK
Model
Standard Capacitive Proximity Sensor | CR34 Pre-wired Shielded and Non-Shielded | CR34-25NO-ZAA-3A-P, CR34-25NC-ZAA-3A-P, CR34-25PO-ZAA-3A-P, CR34-25PC-ZAA-3A-P, CR34-25PS-ZAA-4A-P, CR34-25NS-ZAA-4A-P, CR34-35NO-ZBA-3A-P, CR34-35NC-ZBA-3A-P, CR34-35PO-ZBA-3A-P, CR34-35PC-ZBA-3A-P, CR34-35PS-ZBA-4A-P, CR34-35NS-ZBA-4A-P

Item specifics

Size:
Cylindrical Φ34
Detection range:
2-25mm Adjustable, 2-35mm Adjustable
Case material:
Brass nickel plated
Connection type:
2M cable
Output method:
NPN NO/NC, PNP NO/NC
Degree of protection:
IP67
Operating temperature:
-25°C~+70°C

Review

Description

Standard Capacitive Proximity Sensor Cylindrical Φ34 Pre-wired Shielded and Non-Shielded Series Datasheet
Model
Output
Sensing distance
Connection
Maximum load current
Mounting
Operating voltage
Case material
CR34-25NO-ZAA-3A-P
NPN NO
2-25mm Adjustable
2M Cable
300mA
Shielded
10-30VDC
Brass nickel plated
CR34-25NC-ZAA-3A-P
NPN NC
CR34-25PO-ZAA-3A-P
PNP NO
CR34-25PC-ZAA-3A-P
PNP NC
CR34-25PS-ZAA-4A-P
PNP NO&NC
CR34-25NS-ZAA-4A-P
NPN NO&NC
CR34-35NO-ZBA-3A-P
NPN NO
2-35mm Adjustable
2M Cable
300mA
Non-shielded
10-30VDC
Brass nickel plated
CR34-35NC-ZBA-3A-P
NPN NC
CR34-35PO-ZBA-3A-P
PNP NO
CR34-35PC-ZBA-3A-P
PNP NC
CR34-35PS-ZBA-4A-P
PNP NO&NC
CR34-35NS-ZBA-4A-P
NPN NO&NC
Electrical data
LED Display
Yes
Allowable ripple voltage
<10%
No-load current
<10mA
Leakage Current
<0.01mA
Voltage drop
<2v
Switching frequency
100HZ
Response time
1.5ms
Switching Hysteresis
<15%(Sr)
Repeat accuracy
<5%(Sr)
Degree of protection
IP67
Operating temperature
-25℃ to +70℃
Temperature Drift
<10%(Sr)
Load short-circuit protection / reverse polarity protection
Yes
Overload protection
220mA
Sensing surface material
PBT
Data sheet
Standard Series Capacitive Proximity Switch DataSheet

recommend