DK-GF18 Series DC Through-beam Photoelectric Sensors

Name: DK-GF18 Series DC Through-beam Photoelectric Sensors
Brand: DADISICK
SKU: 18588083
Rating: 4.75 (10 reviews)

Model: DK-GF18 Series / DC Through-beam (6 models)

Item specifics

Series: DK-GF18 Series

Specification group: DC 3-wire / 4-wire Through-beam

Part numbers in group: 6

Sensing distance: 15000 mm

Light source: 850 nm infrared

Operating voltage: 10-30 V DC

Output options: NPN / PNP, NO / NC / NO+NC

Protection level: IP65

Housing: 50 x 50 x 18 mm, ABS

Response time: 5 ms

Connection: Ø5 mm 2 m PVC cable

Weight: About 84 g x 2

Certification: CE, RoHS

Review

Description

DADISICK · DK-GF18 Series · Group C

DC Through-beam Photoelectric Sensors

DC 3-wire and 4-wire through-beam sensor pairs with a 15000 mm sensing distance. 6 orderable part numbers covering NPN and PNP outputs in NO, NC and NO+NC configurations. Each set contains a transmitter and a receiver.

6 part numbers
15000 mm
10-30 V DC
NPN / PNP
IP65
Transmitter + receiver

Get a Quote

DK-GF18 series DC through-beam photoelectric sensor transmitter and receiver — Through-beam versions are supplied as a transmitter and receiver pair.

Orderable models in this group

This group contains 6 orderable part number(s). Choose the output type and sensing distance you need, then quote the exact part number from the table below.

Part number	Output	Wires	Sensing distance
DK-GF18-1500NO-ZBA	NPN NO	3-wire	15000 mm
DK-GF18-1500NC-ZBA	NPN NC	3-wire	15000 mm
DK-GF18-1500PO-ZBA	PNP NO	3-wire	15000 mm
DK-GF18-1500PC-ZBA	PNP NC	3-wire	15000 mm
DK-GF18-1500NS-ZBA	NPN NO + NC	4-wire	15000 mm
DK-GF18-1500PS-ZBA	PNP NO + NC	4-wire	15000 mm

Output codes: NO / NC / NS = NPN NO / NC / NO+NC; PO / PC / PS = PNP NO / NC / NO+NC; J = relay output. 3-wire models use one switched output, 4-wire models provide NO + NC, and relay models provide NO + NC contacts.

Technical parameters

Parameter	Value
Sensing distance	15000 mm
Light source	850 nm infrared light
Standard detection object	200 x 200 mm white cardboard
Output options	DC 3-wire / 4-wire NPN or PNP, NO / NC / NO+NC
Operating voltage	10-30 V DC
No-load current	<15 mA
Maximum load current	150 mA
Leakage current	<0.01 mA
Voltage drop	<1.5 V
Switching frequency	100 Hz
Response time	5 ms
Short-circuit protection	Yes
Overload protection point	300 mA
Switching hysteresis	<15% (Sr)
Repeat accuracy	<5% (Sr)
Protection level	IP65
Working temperature	0 °C to +55 °C
Connection method	Ø5 mm 2 m PVC cable; transmitter 2x0.33 mm², receiver 3x0.33 mm² / 4x0.33 mm²
Housing	50 x 50 x 18 mm, ABS
Indicator	Red LED
Weight	About 84 g x 2
Certification	CE, RoHS

Dimensions

DK-GF18 through-beam dimension drawing 50 mm x 50 mm x 18 mm — Common 50 x 50 x 18 mm outline for both units; 33 mm body depth and Ø5 mm cable entry.

DK-GF18 Series Square Photoelectric Sensors — Sensor with 2 m PVC cable; a reflective board is supplied with retro-reflective versions and a transmitter / receiver pair with through-beam versions.

Wiring

Wire colour	Function
Brown (1)	+10-30 V DC
Blue (3)	0 V
Black (2 / 4)	Switched output to load
White (2)	Second switched output on 4-wire models

Confirm the wiring against the label of the unit received before energising. Do not connect the output to a load exceeding the rated current.

Request a quote for this specification group

Tell us the exact part number from the model table, the target object and distance, your supply voltage, and the quantity. Our engineers will confirm the configuration and send a quotation. This is a general-purpose photoelectric sensor for object detection; it is not a safety-rated device and must not be used for personnel protection.

Get a Quote