KT20-118-2340-2BB|Punch Press Guarding|DADISICK
KT20-118-2340-2BB|Punch Press Guarding|DADISICK
KT20-118-2340-2BB|Punch Press Guarding|DADISICK
KT20-118-2340-2BB|Punch Press Guarding|DADISICK
KT20-118-2340-2BB|Punch Press Guarding|DADISICK
KT20-118-2340-2BB|Punch Press Guarding|DADISICK
Model
KT20-118-2340-2BB

Item specifics

Factory packaging
1 Receiver and 1Emitter accessories, cable
Detection distance:
0.3-6M
Beam spacing:
20mm
Number of optical axes:
118
Protection height:
2340mm
2 Safety outputs (OSSD)
2 PNP
Interface plug
Equipped with M8 connector
Certification:
TUV,UL,CE,RoSH,GB

Review

Description

TECHNICAL DATA
Product model
Products series
KT series punch press guarding
Punch press guarding kit composition
One receiver, one transmitter, two data lines, one right-angle rack, and one t-shaped screw
Safety  Certificate
TÜV CE, China GB certificate, ISO Certificate  UL- FCC,TYPE 2
Standard packaging
Standard industrial environment
Features
Beam gap
20mm
Detect accuracy
28mm
Quantity of beams
118
Operation range
2340mm
Product size
29mm*29mm*L,L is the length of emitter and receiver.
Detection distance
30-6000mm
Response time
≤15ms
Mechanical data
Housing material
Housing material
Metal casing
Aluminium
Lens front panel
Acrylic
Upper and lower cap materials
ABS reinforced nylon PA66+30% GF
Synchronization
Current consumption
≤200mA
Output mode
2  PNP, with current of 500mA and voltage below 1.5V, polarity, short circuit and over-cutting protection
Output status
ON (receiving indicator green light)
Indicator lamp
Transmitter: power indicator light (red); receiver: output indicator light on (green), blackout (red)
Wave length
850nm
Type of emitter
Infrared light (NIR), invisible
Function available
Automatic reset
Synchronization
Line synchronization
Performance data
Circuit protection
Short circuit protection
Voltage protection
Overvoltage protection
Maximum current consumption
24VDC,-20...20%
Fuse
150mA
Environmental data
IP degree of protection
IP68
Resistance to ambient light disturbance
Incandescent light: illumination of light-receiving surface 3000Lx; Sunlight: illumination of light-receiving surface 10000Lx
Ambient air temperature
Operation temperature: - 10~+40 ℃ (but not frozen), storage temperature: - 25 -+55 ℃
Ambient relative humidity
Operating: 35~85% RH, storage: 35~95% RH
Output
Number of safe output circuits (OSSD)
2-circuit
Maximum switch voltage
18V
Minimum switch voltage
2.5V
Standard switching voltage
22.5V
Output circuit type
DC
Maximum current load
380mA
Load inductance
2000
Load capacity
0.3
Maximum residual current
0.2mA
Standard residual current
0.002MA
Voltage drop
1.5V
Safety switch output 1
Connection pin 3, WHITE OSSD1   
Safety switch output 2
Connection pin 4, BLACK OSSD2
Switching type
Transistor  2 PNP
Electrical interface
Composition of interfaces
2 (receiver and transmitter)
Connector type
M8 connector, 
Interface material
Copper nickel plating
Plug material
GY384 gray 30P
Available typical conductor section
0.25mm²
Maximum lenght of cable
100m
Maximum load of cable
4.9A
Cable wrapping material
PVC
DIMENSION
Safety Light Curtain Dimension
ACCESSORIES
Safety light curtain KT series accessories for KT-08 swivel fastening brackets
Mainly used in the safety light curtain, not only solid installation and good shock resistance can be rotated Angle.
Safety light curtain KT series accessories for QCA-02  T-shaped card slot
It can be directly put into the aluminum groove, in the process of installation, it can automatically locate and lock.
Safety light curtain KT series accessories for QCA-03-Convex groove
Convex groove function:high production efficiency, good heat dissipation, easy to use and maintenance.
Safety light curtain KT series accessories for QCA-01 Column stainless steel bracket
The safety light curtain are fixed on support,and then debug according to the specific situation.
Controller QET
Controller QET for Dadisick Safety Light Curtains
Safety Relay Ter-A
safety relay for Dadisick Safety Light Curtains
Safety Relay LS-A
safety relay for Dadisick Safety Light Curtains
Safety Relay QRSN
safety relay for Dadisick Safety Light Curtains
DOWNLOADS
CATALOGUE & USER GUIDE

Punch Press Guarding KT Series User Manual

Punch Press Guarding KT Series-data sheet

3D
KT20-118-2340-2BB.3D-STEP
CERTIFICATE
TÜV Certificate of Safety Light Curtain
UL Certificate of Safety Light Curtain
RoHS Certificate of Safety Light Curtain
ISO Certificate of Safety Light Curtain
CE Certificate of Safety Light Curtain
TECHNICAL DRAWINGS
Punch Press Guarding Cable Description
Safety Light Curtain Cable Description
signal output selection (actual output of transistor working normally)
Safety Light Curtain Signal Output Selection
NPN output wiring diagram
Safety Light Curtain NPN Output Wiring Diagram
PNP Output Wiring Diagram
Safety Light Curtain PNP Output Wiring Diagram